Read Panasonic FA-A888 Service Manual online
6-2
6.2 Installation procedure
Please keep this procedure (It is not printed in the Service Manual).
Remove all shipping materials before installation.
Caution: Make sure the copier is unplugged before the installation.
Remove the original guide plate of
the copier.
1
Location
Shipping material / Procedure
Check
2
Application of the anti-electrostatic liquid
(1) Clean the Plate glass before
application.
(2) Apply (10cc) to a soft pad folded in half.
(3) Uniformly wipe the platen glass in
a lateral direction.
(4) Leave the platen glass for 10
minutes or longer, before handling.
3
Install the hinge positioning
screw.
(2 shoulder screws)
4
Installation of magenet catch plate.
(1) Remove right cover (upper).
(2) Remove the platen glass.
(3) Install the magnet catch plate to the
notches in the control panel.
(4) Reassemble in the reverse order.
Note: Use shorter screws to fix the
original guide plate.
SU001
1
3
3
4
6
6
6
5
6
8
7
2
SU008
Upper Rear Cover
Click on the first or last page to see other FA-A888 service manuals if exist.