Read Panasonic TX-PR37X10 Service Manual online
21
2. For leaving the plasma panel from the front frame, pull the
bottom of the cabinet assy forward, lift, and remove.
3. Remove the Rear cover hooks (L, R).
7.17. Remove the S-Board
1. Remove the Cabinet assy. (See section 7.16.)
2. Remove the S-Board shield case.
2. Remove the S-Board shield case.
3. Remove the screws (
×2
) and remove the S-Board
unit.
4. Disconnect the connector (S1).
5. Remove the Power button.
6. Remove the screw (
5. Remove the Power button.
6. Remove the screw (
×1
) and remove the S-Board.
Click on the first or last page to see other TX-PR37X10 service manuals if exist.