TX-PR37X10 - Panasonic Plasma Service Manual (repair manual). Page 20

20

1. Remove the Plasma panel section from the servicing

stand and lay on a flat surface such as a table (covered
by a soft cloth) with the Plasma panel surface facing
downward.

2. Remove the Hanger metals (L, R) fastening screws (

×4

 each) and remove the Hanger metals (L, R).

1. Remove the Control button unit. (See section 7.7.)
2. Remove the Hanger metal R. (See section 7.13.)
3. Remove the flexible cables holder fastening screws (

×8

).

4. Disconnect the flexible cables (CB1, CB2, CB3 and CB4).
5. Disconnect the connector (C14).
6. Disconnect the flexible cable (C10).
7. Remove the screws (

×4 

) and remove the C1-Board.

1. Remove the Tuner unit. (See section 7.4.)
2. Remove the Hanger metal L. (See section 7.13.)
3. Remove the flexible cables holder fastening screws (

×8

).

4. Disconnect the flexible cables (CB5, CB6, CB7 and CB8).
5. Disconnect the flexible cables (C20, C21 and C22).
6. Disconnect the connectors (C23 and C25).
7. Remove the screws (

×4 

) and remove the C2-Board.

1. Remove the cabinet assy and the plasma panel fastening

screws (

×2 ).