Read Panasonic TH-R37PV8R Other Service Manuals online
25
8 Measurements and Adjustments
8.1.
Driver Set-up
8.1.1.
Item / Preparation
1. Input a white signal to plasma video input.
2. Set the picture controls as follows.
2. Set the picture controls as follows.
Picture menu: Dynamic
PNR: OFF
Aspect: 16:9
PNR: OFF
Aspect: 16:9
Caution
1. First perform Vsus adjustment.
2. Confirmation of Vscn voltage should be performed after
2. Confirmation of Vscn voltage should be performed after
confirmation of Vad adjustment.
When Vad=-149V, Voltage of Vscn is -4V ±4V.
When Vad=-149V, Voltage of Vscn is -4V ±4V.
8.1.2.
Adjustments
Adjust driver section voltages referring the panel data on the
panel data label.
Check or adjust the following voltages with the multimeter.
panel data label.
Check or adjust the following voltages with the multimeter.
*See the Panel label.
Name
Test Point
Voltage
Volume
Remarks
Vsus
TPVSUS
(SS)
(SS)
Vsus ± 2V
R628 (P)
*
Ve
TPVE (SS)
Ve ± 1V
VR16000 (SS) *
Vset
TPVSET
(SC)
(SC)
320V +7V, -9V Fixed
Vad
TPVAD (SC) -149V ± 1V
VR16600 (SC)
Vscn
TPVSCN
(SC)
(SC)
Vad+145V ± 4V Fixed
Vda
TPVDA (SS) 75V ± 1V, -2V
Fixed
Click on the first or last page to see other TH-R37PV8R service manuals if exist.