Read Panasonic TH-R37PV8R Other Service Manuals online
21
7.9.
Remove the SD-Board (42 inch)
1. Remove the flexible cables (SD1B, SD2B, SD3B and
SD4B) connected to the SD-Board.
2. Remove the flexible cable (SU11-SD11) and the bridge
connectors (SC42-SD42 and SC46-SD46).
3. Remove the screws (
×2 ,
×2
) and remove the SD-
Board.
7.10. Remove the SC-Board
1. Remove the SU-Board, SM-Board and SD-Board. (See
section 7.7., 7.8. and 7.9.)
2. Unlock the cable clampers to free the cable.
3. Disconnect the connector (SC2).
4. Disconnect the flexible cable (SC20).
5. Remove the screws (
3. Disconnect the connector (SC2).
4. Disconnect the flexible cable (SC20).
5. Remove the screws (
×6
) and remove the SC-Board.
7.11. Remove the SS-Board
1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (SS11, SS12, SS23 and
2. Disconnect the connectors (SS11, SS12, SS23 and
SS34).
3. Disconnect the flexible cables (SS53A and SS56A) (42
inch)/(SS53 and SS56) (37 inch).
4. Remove the molding prop (
×1 ).
5. Remove the screws (
×5
) and remove the SS-Board.
7.12. Remove the stand brackets
1. Remove the plasma panel section from the servicing
stand and lay on a flat surface such as a table (covered)
with the plasma panel surface facing downward.
with the plasma panel surface facing downward.
2. Remove the stand brackets (left, right) fastening screws
(
×4
each) and remove the stand brackets (left, right).
Click on the first or last page to see other TH-R37PV8R service manuals if exist.