Read Panasonic CF-Y4HWPZZ Service Manual online
2.2.1. Preparations
·
Before disassembly, be sure to perform the following
steps.
steps.
1. End the Windows.
2. Turn off the power, and remove the AC Adapter.
3. Slide the two Hooks (A) of the Battery Pack toward the
2. Turn off the power, and remove the AC Adapter.
3. Slide the two Hooks (A) of the Battery Pack toward the
inside, and remove the Battery Pack.
4. Remove Screw (A), and then remove the DIMM Cover
Ass’y.
Screw (A):XSB2+4FNL
Screw (A):XSB2+4FNL
5. If the optional DIMM Memory is provided, remove it. Also
disconnect any connected devices.
Hook (A)
Battery Pack
DIMM Cover Ass'y
Screw (A)
2.2.2. Removing the Keyboard Ass’y
·
Preparation: Make sure that the steps in section 2.2.1
have been taken first.
have been taken first.
1. Remove the six Screws (B).
Screw (B): DXHM0039ZA
Screw (B)
Screw (B)
Screw (B)
Bottom Cover Ass'y
2. perate the Open Button of the LCD Unit, and open the LCD
Block to an angle of 90 degrees or more.
Release the four hooks of the LCD Unit and the two hooks,
one at the left and one at the right, by inserting a
regularslot-head watch screwdriver into them.
Release the four hooks of the LCD Unit and the two hooks,
one at the left and one at the right, by inserting a
regularslot-head watch screwdriver into them.
3. Lift up the Keyboard from the LCD, and turn it over on the
Top Case Ass’y.
4. Disconnect
the
FFC
(Keyboard)
from
connectors
(CN34)/(CN35), and then remove the Keyboard Ass’y.
CN34
CN35
Keyboard Ass'y
LCD Block
Hook
LCD Latch Knob
Top Case
2.2.3. Removing the Bottom Case Ass’y
·
Preparation: Make sure that the steps in sections 2.2.1
and 2.2.2 have been taken first.
and 2.2.2 have been taken first.
1. Remove Screw (C).
Screw (C): DFHE5025XA
2. Remove the nine Screws (D).
Screw (D): DXHM0057ZA
Screw (C)
Screw (D)
Screw (D)
Screw (D)
Screw (D)
Screw (D)
Bottom Case Ass'y
2.2. Disassembly
2-2
Click on the first or last page to see other CF-Y4HWPZZ service manuals if exist.