Read Panasonic CF-WEB184 (serv.man2) Service Manual online
2-1
2 Disassembly Instructions
2.1.
Preparation
Before disassembling, be sure to make the following preparations
• Disconnect the AC adaptor.
• Remove other devices if they are connected.
• Remove other devices if they are connected.
Attention:
• You cannot reuse the Conductive Clothes and the heat
dissipating parts such as Sheet and Rubber. Use new parts.
2.2.
Removing the Side Guide Plate,
the Unit Guide, the Unit Guide
Plate (L), the Unit Guide Plate
(R), and the Cable Hold Plate
the Unit Guide, the Unit Guide
Plate (L), the Unit Guide Plate
(R), and the Cable Hold Plate
1. Remove the four Torx Screws <N1>, and remove the two
Side Guide Plates.
2. Remove the two Torx Screws <N1>, and remove the Unit
Guide Plate (L).
3. Remove the two Torx Screws <N1>, and remove the Unit
Guide Plate (R).
4. Remove the two Screws <N6>, and remove the two Unit
Guides.
5. Remove the three Screws <N2>, and remove the Cable
Hold Plate.
Torx Screws <N1>:DRHM0068ZA
Screws <N2>:DRSB3+6FKL
Screws <N6>:DRHM0104ZAT
Screws <N2>:DRSB3+6FKL
Screws <N6>:DRHM0104ZAT
2.3.
Removing the MT Dock PCB
1. Remove the four Screws. <N2>
2. Disconnect the two Cables from the two Connectors.
2. Disconnect the two Cables from the two Connectors.
(CN905,CN906)
3. Remove the three Screws. <N2>
4. Remove the DU L
4. Remove the DU L
eg Plate, the MP Insulation Sheet and
the FFC Protect Sheet.
5. Remove the Insulation Sheet CN, DU CN Gasket and the
D
ockleg Cover Sheet.
6. Remove the two Screws. <N3>
7. Disconnect the two Cables from the two Cables. (CN902,
7. Disconnect the two Cables from the two Cables. (CN902,
CN903)
Side Guide Plate
Side Guide Plate
Unit Guide Plate(L)
Unit Guide Plate(R)
<N1>
<N1>
<N1>
<N1>
Cable Hold Plate
Cable Hold Plate
<N6>
<N2>
<N2>
<N2>
<N6>
Unit Guide
<N2>
<N2>
<N2>
<N2>
Dummy Sheet CN
DY Angle Ass’y
Insulation Sheet CN
FFC DU CN
DU Con Cover
DU Con Cover Spacer
IO Dock Leg
FFC Protect Sheet
Dockleg Cover Sheet
DU L
eg Plate
MP Insulation Sheet
Connector(CN905)
Connector(CN906)
DU CN Gasket
<N3>
<N3>
MT Dock PCB
Connector(CN902)
Connector(CN903)
Click on the first or last page to see other CF-WEB184 (serv.man2) service manuals if exist.