CF-WEB184 (serv.man2) - Panasonic PC Service Manual (repair manual)

cf-web184 (serv.man2) service manual
Model
CF-WEB184 (serv.man2)
Pages
18
Size
1.61 MB
Type
PDF
Document
Service Manual
Brand
Device
PC / CAR MOUNT KIT
File
cf-web184-sm2.pdf
Date

Read Panasonic CF-WEB184 (serv.man2) Service Manual online

O
rder No.
CPD0610205C0
Car Mount Kit
CF-WEB184
This apparatus must be earthed for your safety.
To ensure safe operation the three-pin plug must be inserted only into a standard three-pin power point
which is effectively earthed through the normal household wiring.
Extension cords used with the equipment must be three-core and be correctly wired to provide connec-
tion to earth. Wrongly wired extension cords are a major cause of fatalities.
The fact that the equipment operates satisfactorily does not imply that the  power point is earthed and
that the installation is completely safe.
For your safety, if you have any doubt about the effective earthing of the power point, consult a quali-
fied electrician.
FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY
This appliance is supplied with a moulded three pin mains plug for your safety and convenience.
A 3 amp fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 3 amps and
that it is approved by ASTA or BSI to BS 1362.
Check for the ASTA mark 
 or the BSI mark 
 on the body of the fuse.
If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a replacement cover is obtained.
A replacement fuse cover can be purchased from your local Panasonic Dealer.
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR
HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED
OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED
INTO ANY 13 AMP SOCKET.
If a new plug is to be fitted please observe the wiring code as shown below.
If in any doubt please consult a qualified electrician.
Warning: THIS APPLIANCE MUST BE EARTHED.
Important
The wires in this mains lead are coloured in accordance with the following code:
Green-and-yellow:
Earth
Blue:
Neutral
Brown:
Live
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured GREEN-and-YELLOW must be connected to the terminal in the plug
which is marked by the letter E or by the safety earth symbol 
 coloured GREEN or GREEN-and-
YELLOW.
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or
coloured BLACK.
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L
or coloured RED.
The mains plug on this equipment must be used to disconnect the mains power.
Please ensure that a socket outlet is available near the equipment and shall be easily accessible.
How to replace the fuse
Open the fuse compartment with a screw-
driver and replace the fuse.
Warnings
This equipment is not designed for connection to an IT power system.
(An IT system is a system having no direct connections between live parts and Earth; the exposed-conducive-
parts of the electrical installation are earthed.
An IT system is not permitted where the computer is directly connected to public supply systems in the U.K.)
Disconnect the mains plug from the supply socket when  the computer is not in use.
This equipment is produced to BS800/1983.
For U.K.
WARNING
Safety precautions 
 
1. Before servicing, unplug the power cord to prevent an electric shock. 
2. When replacing parts. Use only manufacture’s recommended components for safety. 
3. Check the condition of the power cord. Replace if wear or damage is evident. 
4. After servicing, be sure to restore the lead dress, insulation barriers, insulation papers, shield, etc. 
 
 
Important Safety Instructions 
 
When using your telephone equipment, basic safety 
precautions should always be followed to reduce the 
risk of fire, electric shock and injury to persons, 
including the following: 
 
1.  Do not use this product near, for example, near 
a bathtub, washbowl, kitchen sink or laundry tub, 
in a wet basement or near a swimming pool. 
2.  Avoid using a telephone (other than a cordless 
type) during shock from lightning. 
3.  Do not use the telephone to report a gas leak in 
the vicinity of the leak. 
4.  Use only the power cord indicated in this 
manual. 
 
 
 
 
 
 
 
 
 
 
Important Safety Instructions 
Top Side
A.  Security lock 
LOCK
You can connect a Kensington 
cable. Refer to the instruction 
manual of the cable.
B. LAN port 
C. USB port 
D. Serial port 
E. External display port 
F.  Headphone jack 
G. Microphone jack 
H. DC-IN jack 
DC IN 16V
I.  Key insertion slot 
J.  Dock indicator 
DOCKED
K. Latch
L.  Lever 
DOCK UNDOCK
The lever is locked when the 
key is inserted and turned 
toward   side.  When  the 
computer has been installed, 
be  absolutely  sure  to  lock 
this lever by turning the key 
toward  side.
The lock was turned to   side at the factory prior to shipment.
When  installing  the  computer,  con? rm  that  the  lever  is  slid  toward 
the UNDOCK side.
NOTE
Bottom Side
  The  ends  of  the  screws 
are  protruding. Take  care 
to  protect  your  fingers,  etc. 
from their sharp points when 
installing the Car Mounter.
CAUTION
Installation holes are provided in the areas indicated by 
the arrows in the figure above.
A.  External wireless WAN antenna 
port
WWAN
(optional)
B.  External  wireless  LAN/GPS 
antenna port 
WLAN/GPS
(optional)
Page of 18
Display

Download Panasonic CF-WEB184 (serv.man2) Service Manual (Repair Manual)

Here you can read online and download Panasonic CF-WEB184 (serv.man2) Service Manual in PDF. CF-WEB184 (serv.man2) service manual will guide through the process and help you recover, restore, fix, disassemble and repair Panasonic CF-WEB184 (serv.man2) PC. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.