KX-UDT111RU (serv.man3) - Panasonic PBX Service Manual (repair manual). Page 17

17

Connect the AC adaptor to the charger.

• The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a ceil-

ing-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected.

• Fasten the AC adaptor cord to the cord holder.
• Use only the included Panasonic AC adaptor.

• To reduce the risk of fire or electric shock, do not overload AC outlets and extension cords.
• Do not bundle the charger’s AC adaptor cord with the power cords of machines located nearby.
• Completely insert the AC adaptor/power plug into the AC outlet. Failure to do so may cause electric shock and/or excessive heat

resulting in a fire.

• Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power outlet, then wiping with a dry cloth.

Accumulated dust may cause an insulation defect from moisture, etc. resulting in a fire.

Open the battery cover, insert the batteries, and close the cover as indicated below.

At the time of shipment, the batteries are not charged.
Please charge the batteries for about 7 hours before using the handset for the first time.

• The charge indicator will turn off when the battery is fully

charged. For more information about charging the battery.

• It is normal for the handset and charger to feel warm while

the battery are charging.

• Keep devices sensitive to magnetic fields away from the

charger.

• Use only the included charger.

To AC Outlet

Hooks