Read Panasonic KX-UDS124CE Service Manual online
25
KX-UDS124CE
7.3.
PS registration
Access to Web user interface
1. It is nessesary to open the web port of the unit beforehand. Set "Enable CSWeb" using phone user interface programming.
(Or Set Default static IP mode*.)
2. Open your web browse, and enter the unit's IP address following "http://" consecutively into the address field.
3. For authentication, enter "User name" and "Password" for Customer Service, and click [OK].
3. For authentication, enter "User name" and "Password" for Customer Service, and click [OK].
User name : admin
Password : adminpass
Password : adminpass
Note
When you want to register PS, .ID and Password are different from customer service mode.
4. Click System tab and click Air settings button.
If the CS is slave mode , need to change Master of Air Sync Group 1.
Check Master and click [save].
After click [save] , UDS will restart automatically.
Check Master and click [save].
After click [save] , UDS will restart automatically.
Enter Default Static IP mode again.
Master CS
Slave CS
Click on the first or last page to see other KX-UDS124CE service manuals if exist.