Read Panasonic KX-TES824CA / KX-TEM824CA / KX-TE82461X / KX-TE82474X / KX-TE82480X / KX-TE82483X / KX-TE82491X / KX-TE82492X / KX-TE82493X / KX-A227X Service Manual online
17
KX-TES824CA/KX-TEM824CA
1) Conference switch
Normally, pin 6 of the analog switch IC2 is low level, but during conferences, this pin becomes high level. Because, during con-
ferences, it should compensate the return loss by connecting the balance network BN2 and the balance network BN3 in parallel.
ferences, it should compensate the return loss by connecting the balance network BN2 and the balance network BN3 in parallel.
2) Mute switch
The mute switch consists of pin 13, 1 and 2 of the analog switch(IC2). This switch has the following functions.
a) When a dial signal (DP) is sent to the COL, signals from the extensions are blocked.
b) When the hold on music is sent to the COL, signals from the extensions are blocked.
c) When the COL interface circuit is in the idle state, oscillation of COL bidirectional amplifier is inhibited. When pin 13 of IC2
changes to low level, the interval between pins 1 and 2 of the analog switch turns off, and signals are blocked.
a) When a dial signal (DP) is sent to the COL, signals from the extensions are blocked.
b) When the hold on music is sent to the COL, signals from the extensions are blocked.
c) When the COL interface circuit is in the idle state, oscillation of COL bidirectional amplifier is inhibited. When pin 13 of IC2
changes to low level, the interval between pins 1 and 2 of the analog switch turns off, and signals are blocked.
3) Shunt switch
The shunt switch consists of pin 12, 10 and 11 of analog switch IC2.It is used to prevent the pulse dialing signal which is trans-
mitted to the extensions. When pin 12 of IC2 changes to high from low, the analog switch becomes ON (the interval between pin
10 and 11), and GAIN of the COL cross point operational amplifier becomes zero.
mitted to the extensions. When pin 12 of IC2 changes to high from low, the analog switch becomes ON (the interval between pin
10 and 11), and GAIN of the COL cross point operational amplifier becomes zero.
Condition of COL interface amplifier circuit and analog switches.
Shunt SW
Mute SW
Conference SW
pin no. of analog switch
12
13
6
No connection (idle)
H (on)
L (off)
L (off)
Two party call
L (off)
H (on)
L (off)
Conference
L (off)
H (on)
H (on)
Hold on music transmission
L (off)
H (on)
L (off)
Click on the first or last page to see other KX-TES824CA / KX-TEM824CA / KX-TE82461X / KX-TE82474X / KX-TE82480X / KX-TE82483X / KX-TE82491X / KX-TE82492X / KX-TE82493X / KX-A227X service manuals if exist.