KX-NS8290CE - Panasonic PBX Service Manual (repair manual). Page 24

24

Collects and displays system error information.
Whenever there is a system failure, the Adaptor stores the error code generated. The connected PC collects all of these codes,
along with other information, and displays an explanatory error message.
This screen can be accessed only in On-line mode.

The functions of the buttons on this screen are as follows:

The items displayed on screen are as follows:

Displays a log of system events. Each entry in the log includes the following information:

• Type: Describes the type of system event.
• Date: The date and time the system event occurred.
• Message: Details about the system event.

This screen can be accessed only in On-line mode.

Cancel

Closes the Error Log screen without saving.

Save

Saves the currently displayed Error Log information as a text file.

Minor

Displays minor errors, which affect only a certain part of system operation.

Major

Displays major errors, which affect operation of the whole system, or result in system failure.

Clear

Erases the stored error log information from both the screen and the PBX.

Log Information

Displays probable causes of the errors and their solutions.

Index

The ordinal number assigned to an error record in the current log.

Date

The date of the error detection.

Time

The time of the error detection.

Error Code

The 3-digit error code assigned by the Adaptor.

Sub Code

SMDR:
The 8-digit sub code of the relevant hardware (BBWXYYZZ).
Web Maintenance Console:
The 6-digit sub code of the relevant hardware (WXYYZZ). 
(The site number of the PBX can be confirmed in the Site column of the Error Log.)

• BB: Site ID (00 to 15)

- Corresponds to site numbers of PBXs in the One-look network (1 to 16)

• W: Slot type

- Physical slot: " " (blank)
- Virtual slot: "*" (asterisk)

When X=1

• YY: Slot number/Process code

- Physical slot: 00 to 05

(00: Mother Board; 01 to 05: Optional service card slots)

- Virtual slot: 31 to 82 

(31 to 46: Virtual Trunk Slots; 47 to 66: Virtual Extension Slots; 67 to 82:Virtual IP-CS 
Slots)

• ZZ: Port number

- For optional service cards:

The port number (01 to XX) will be displayed.

When X=5

• YY: Process code
• ZZ: Process number (determined by each process)

When there is no parameter for slot and port number, YY and ZZ will be displayed as "00".
Example: Sub code for the mother board = "01 00000"

Error Message

A description of the error.