Read Panasonic KX-NS5290CE Service Manual online
10
KX-NS5290CE
6 Installation Instructions
6.1.
The Mother Board and Expansion Cards
6.1.1.
PRI30/E1 Card
Function
A combination card including:
•1 ISDN Primary Rate Interface port (30B channels).
EURO-ISDN/ETSI compliant.
1 E1 port (30B channels).
ITU-T standard compliant.
1 E1 port (30B channels).
ITU-T standard compliant.
Accessories and User-supplied Items
Accessories (included): Spacer x 3, Slot cover x 1
User-supplied (not included): RJ45 connector, Twisted pair cable
Accessories (included): Spacer x 3, Slot cover x 1
User-supplied (not included): RJ45 connector, Twisted pair cable
CAUTION
• When connecting this optional service card to the trunk, connect through an NT1; do not connect to the U interface of the trunk
directly.
• PRI ports are SELV ports and should only be connected to SELV services.
Notice
• The cable to connect to the ISDN Primary Rate Interface port of the PRI30 card should be CAT 5 (Category 5) or higher.
Note
• You can select PRI30 use or E1 use by Web Maintenance Console.
- For switching from PRI30 use to E1 use:
Delete the PRI30 card first and select the E1 card in the "PBX Configuration
Configuration Slot" screen of the Web Main-
tenance Console. To restart the PBX, click Maintenance
System Control System Reset.
- For switching from E1 use to PRI30 use:
Delete the E1 card first and select the PRI30 card in the "PBX Configuration
Configuration Slot" screen of the Web Main-
tenance Console. To restart the PBX, click Maintenance
System Control System Reset.
• In some countries/areas, this optional service card must not be connected to the Public Switched Telephone Network.
• To confirm the trunk connection.
• To confirm the trunk connection.
Pin Assignments
No.
Signal Name
Level [V]
Function
1
RX+
(+)
Receive data (+)
2
RX-
(-)
Receive data (-)
3
Reserved
—
—
4
TX-
(-)
Receive data (-)
5
TX+
(+)
Receive data (+)
6-8
Reserved
—
—
Click on the first or last page to see other KX-NS5290CE service manuals if exist.