Read Panasonic KX-NS0132X Service Manual online
10
KX-NS0132X
Legacy Gateway
Before Installing the STACK-S (TDE) Card
Before you install a STACK-S (TDE) card in a PBX that has been used, make a backup of the system data in case you want to
use it later, with another PBX, etc. For details about making a backup, refer to the PC Programming Manual of the correspond-
ing PBX.
use it later, with another PBX, etc. For details about making a backup, refer to the PC Programming Manual of the correspond-
ing PBX.
To use the PBX as a legacy gateway, the MPR card must be replaced with a STACK-S (TDE) card.
Note
• For some PBXs, the appearance of the MPR card and BUS-S card may differ from the following illustrations.
• For KX-TDE620 and KX-TDA620, replace the BUS-S card with a STACK-S (TDE) card.
• For KX-TDE620 and KX-TDA620, replace the BUS-S card with a STACK-S (TDE) card.
Indication
Colour
Description
RUN
Green
Status indication for legacy gateway
• ON: Normal
• OFF: Power off
• Slow Flashing: Starting up
• Moderate Flashing: STACK-S (TDE) card error
• OFF: Power off
• Slow Flashing: Starting up
• Moderate Flashing: STACK-S (TDE) card error
Note
LED flashing patterns are as follows:
• Slow Flashing: 60 times per minute
• Moderate Flashing: 120 times per minute
• Moderate Flashing: 120 times per minute
ALARM
Red
Alarm status indication for legacy gatewa
• ON: Alarm
• OFF: Normal
• OFF: Normal
Click on the first or last page to see other KX-NS0132X service manuals if exist.