Read Panasonic KX-NS0132X Service Manual online
9
KX-NS0132X
5 Installation Instructions
5.1.
Stacking Cards
5.1.1.
STACK-S (TDE) Card
Function
A stacking card to be installed in the MPR card slot or the BUS-S card slot of the PBX to be used as a legacy gateway.
For the following PBXs, this card is installed in the MPR card slot:
KX-TDE100, KX-TDE200,
KX-TDA100, KX-TDA200,
KX-TDE600, KX-TDA600
For the following PBXs, this card is installed in the BUS-S card slot:
KX-TDE620, KX-TDA620
This card can be used only with PCMPR Software Version 002.03000 or later.
For the following PBXs, this card is installed in the MPR card slot:
KX-TDE100, KX-TDE200,
KX-TDA100, KX-TDA200,
KX-TDE600, KX-TDA600
For the following PBXs, this card is installed in the BUS-S card slot:
KX-TDE620, KX-TDA620
This card can be used only with PCMPR Software Version 002.03000 or later.
Accessories and User-supplied Items
Accessories (included): Stacking cable x 1
User-supplied (not included): None
User-supplied (not included): None
WARNING
A lithium battery is used in the STACK-S (TDE) card. There is a risk of explosion if the battery is replaced with an incorrect type.
Dispose of used batteries according to the manufacturer’s instructions.
Dispose of used batteries according to the manufacturer’s instructions.
CAUTION
When installing or removing this card, the power switch must be turned off.
Notice
When stacking other PBXs with the KX-NS1000, place them well within reach of the stacking cable (2 m).
LED Indications
STACK-S (TDE) Card
Indication
Colour
Description
CARD STATUS Green
STACK-S (TDE) card status indication
• ON: INS (In Service)
Red
STACK-S (TDE) card status indication
• ON: Fault
• Flashing: OUS (Out of Service)
• Flashing: OUS (Out of Service)
Click on the first or last page to see other KX-NS0132X service manuals if exist.