UB-T780 - Panasonic Other Service Manuals Service Manual (repair manual). Page 15

15

The method for attaching the wall mounting plates to the wall will vary depending on the wall's structure.
Three available options are listed below.
Other methods may be necessary depending on the wall.
<Metal or Concrete walls>

Stud plug (not included) are needed.

Split-wing toggles (not included) are needed.

Wood screws (not included) are needed.

Drill eight holes in the wall.
For the correct hole size, refer to the instructions for the particular stud plugs used.

Insert the bolt through the hole in the wall mounting plate and tighten until the wall
mounting plate is securely fixed to the wall.

Insert the bolt through the hole in the wall mounting plate and into the hole in the wall
so that the arms of the split-wing toggle are horizontal.
For the correct hole size, refer to the instructions for the particular split-wing toggles
used.

After the arms expand, pull the wall mounting plate out until the arms of the split-wing
toggle grip firmly into the wall.

Tighten the bolt until the wall mounting plate is securely fixed into the wall.

Insert the wood screws through the hole in the wall mounting plate and tighten until
the wall mounting plate is securely fixed to the wall.
For the correct hole size, refer to the instructions for the particular wood screws used.