Read Panasonic UB-5365 / UB-5865 (serv.man2) Service Manual online
113
11.4. Necessary Operation after Parts Replacement
Replaced board or parts
Items to be adjusted or checked
Remarks
CONTROL Board
1. Turn on the power after replacing the CONTROL Board.
(Check that
"H1"
appears on the Control Panel.)
2. Perform the setting of
"Screen size"
and
"Destination code"
. (See
Sec.9.)
Note:
The "Screen size" and "Destination code" are not set on the CONTROL
Board for the service part on this product.
Board for the service part on this product.
3. Adjust the Image Sensor. (See Sec. 10.)
4. Check "Multi-Copy" function
5. Check "2-Screen Copy" function
6. Perform the Printing Test. (See Sec 9.)
4. Check "Multi-Copy" function
5. Check "2-Screen Copy" function
6. Perform the Printing Test. (See Sec 9.)
Sensor Boards (DOOR SENSOR,
PAPER SENSOR,
END SENSOR, TOP SENSOR,
HOME SENSOR)
PAPER SENSOR,
END SENSOR, TOP SENSOR,
HOME SENSOR)
1. Check copy function.
Image Sensor
1. Adjust the Image Sensor. (See Sec 10.)
2. Check copy function.
2. Check copy function.
Screen (Film)
1. Press the "Advance Key" to check screen feed.
2. Check copy function.
2. Check copy function.
Screen Motor
1. Press the "Advance Key" to check screen feed.
2. Check copy function.
2. Check copy function.
Printer Motor
1. Perform the Printing Test. (See Sec 9.)
Thermal Printer Head
1. Perform the Printing Test. (See Sec 9.)
Pick-up Roller
1. Check "Multi-Copy" function.
Platen Roller
1. Check "Multi-Copy" function.
Others (Replace or assemble
mechanical parts in the printer.)
mechanical parts in the printer.)
1. Check "Multi-Copy" function.
Click on the first or last page to see other UB-5365 / UB-5865 (serv.man2) service manuals if exist.