Read Panasonic UB-5315SERIES / UB-5815SERIES (serv.man2) Service Manual online
3.1. Function of Control Panel
Name
Panel
Description
1
Contrast / Remaining Film
Indicator
Indicator
1.
This indicator notifies the user when the thermal transfer film is approaching to replace, and
also notifies the contrast condition to copy the screen.
also notifies the contrast condition to copy the screen.
(Indicator Status)
a.
OFF: Normal contrast
b.
ON: Darker (than normal) contrast
c.
Flashing: Almost time to replace the Thermal Transfer Film
Note:
1. Flashing indicator starts when only about 15 or less sheets can be copied by the
Thermal Transfer Film.
Thermal Transfer Film.
2. Flashing indicator will go out when the power is turn OFF, or the printer door is open.
(When copying is performed, this indicator will begin flashing again.)
(When copying is performed, this indicator will begin flashing again.)
2
Contrast key
1.
Each time this key is pushed, Panaboard alternates its contrast between normal and dark
contrast modes.
contrast modes.
3
2-Screen Copy key
1.
Pushing this key enables the Panaboard to copy the 1
st
and 2
nd
screen faces on a piece of
paper.
Note:
On the test mode, this key operates as “-”.
4
Copy key
1.
Pushing this key enables the Panaboard to copy the current screen.
Note:
On the test mode, this key operates as “Execute”.
5
Multi-copy / Error Indicator
1.
Each time “Multi-copy / Stop“ key is pushed, “Multi-copy / Error Indicator“ changes as
follows
follows
1
→2→3→..... 9→1.....
Note:
During copying, Panaboard decreases the number gradually, according to the rest of
copy. And after reaching “0“, the indicator will be reset to “1 “.
copy. And after reaching “0“, the indicator will be reset to “1 “.
Example: 5
→4→3→2→1→0→1
2.
This indicator also issues an error code when some errors occur.
(See 11.1 regarding troubleshooting on error codes.)
Note:
On the test mode, this indicator operates as the status indication of parameters set.
6
Multi-copy / Stop key
1.
As the “Multi-copy” key, by pressing this key until the desired number appears on the above
Multi-copy / Error Indicator, number of copies to be required is set. And during copy process,
this key operates as “Stop” Key to cancel copy on its way.
Multi-copy / Error Indicator, number of copies to be required is set. And during copy process,
this key operates as “Stop” Key to cancel copy on its way.
Note:
On the test mode, this key operates as “+”.
7
Advance key
1.
Pushing this key enables the Screen to turn from the right to the left.
Note:
On the test mode, this key operates as “Cancel”.
9
UB-5315 SERIES / UB-5815 SERIES
Click on the first or last page to see other UB-5315SERIES / UB-5815SERIES (serv.man2) service manuals if exist.