Read Panasonic UB-5315SERIES / UB-5815SERIES (serv.man2) Service Manual online
4.4.3. Collapse the carton box.
Remove the tape on the unopened side of the carton box, then collapse the box as the cushion. And lay the Panaboard on the box
to avoid any damage.
to avoid any damage.
Note:
Do not discard the carton box and packing material. They will be needed when repackaging the Panaboard.
4.4.4. Remove the protective plastic bag.
After removing the protective plastic bag from the Screen Unit and Printer Unit, set those units on the top of the collapsed carton
box. And remove the 4 cushions from the Screen Unit.
box. And remove the 4 cushions from the Screen Unit.
Note:
· Do not touch the Screen surface as doing so may damage it.
4.4.5. Attach the Screen Unit to the optional Stand or Wall-mounting Fixture.
After assembling the Board Attachment (Upper) [Wall-mounting Fixture (Upper)] and Board Attachment (Lower) [Wall-mounting
Fixture (Lower)] to Stand base, or to the wall, the following procedure is common in two installations (Stand, Wall) except for
adjusting Screen Unit Height on the Stand.
Fixture (Lower)] to Stand base, or to the wall, the following procedure is common in two installations (Stand, Wall) except for
adjusting Screen Unit Height on the Stand.
In this case, as the representative of the two installations, installation sample to the optional stand is shown below.
13
UB-5315 SERIES / UB-5815 SERIES
Click on the first or last page to see other UB-5315SERIES / UB-5815SERIES (serv.man2) service manuals if exist.