Read Panasonic KV-SS905C Service Manual online
4.12.1. Setting the language
(1) Turn the power on while pressing the HOME key.
Note
The language setting mode is selected
automatically when the scanner’s power is turned
on
automatically when the scanner’s power is turned
on
for
the
first
time
after
the
scanner
was
purchased.
(2) Use the [
] key or [
] key to select the “English Letter”,
“English A4” or “Deutsch A4”, “
”.
(3) Press the HOME key.
··
The display will change to the select language, then the
scanner will be ready.
scanner will be ready.
··
This setting will remain until it is changed to another
setting.
setting.
4.12.2. Setting the SCSI ID and Terminator
(1) Press the OTHERS key.
(2) Press the MODE key.
Press the MODE key [
] to display the SCSI ID, which is
the fourth setting.
(3) Press the SELECT [
] key or [
] key to select the
desired setting.
The [
The [
] key moves to the next ID as shown below.
The [
] key moves to the previous ID.
··
Wide SCSI setting
(Disable)
(Enable)
(4) Press the MODE key [
] to switch to the terminator
setting.
To activate the SCSI ID and Terminator settings, press the
HOME key to return to "READY", then turn the unit off and
on.
To activate the SCSI ID and Terminator settings, press the
HOME key to return to "READY", then turn the unit off and
on.
(5) Press the SELECT [
] key or [
] key to select the
desired setting.
The [
The [
] key moves to the next content as shown below.
The [
] key moves to the previous content.
Note
··
If the scanner is the last device in the SCSI chain, then the terminator should be set to "Enable". But, if the scanner
is the last device and the power is turned off, then a terminator should be attached to the SCSI connector on the
scanner.
is the last device and the power is turned off, then a terminator should be attached to the SCSI connector on the
scanner.
14
KV-SS905C
Click on the first or last page to see other KV-SS905C service manuals if exist.