Read Panasonic KV-SS905C Service Manual online
Classified Code
Error Code
Possible Cause
Check point
F80:
Double feed sensor error
Double feed sensor error
60 ×× ×× 00
Double feed sensor error occurs.
1. To confirm double feed detector operates
properly, execute Double Feed Test in
Test Mode.
Test Mode.
2. Remove paper dust around the sensor.
3. Confirm each cable and connector
condition as follows.
a. Between CN12 on DOUBLE FEED
DETECTOR [G] Board and CN13 on
RELAY [LOWER] Board
RELAY [LOWER] Board
b. Between CN16 on RELAY [LOWER]
Board and CN2011 on MOTHER Board
c. Between CN2014 on MOTHER Board
and CN27 on RELAY [UPPER] Board
d. Between CN26 on RELAY [UPPER]
Board and CN21 on DOUBLE FEED
DETECTOR (R) Board
DETECTOR (R) Board
4. Adjust Double Feed Detector in Test Mode.
5. Replace DOUBLE FEED DETECTOR (G)
Board.
6. Replace RELAY [LOWER] Board.
7. Replace DOUBLE FEED DETECTOR (R)
Board.
8. Replace RELAY [UPPER] Board.
9. Replace MOTHER Board.
10. Replace MAIN Board.
H40:
Front side lamp lighting
error
Front side lamp lighting
error
54 ×× ×× 00
Front side lamp lighting error occurs.
1. Check front side lamp lights properly.
2. Check front side lamp is installed to front
side lamp module properly.
3. Confirm each cable and connector
condition as follows.
a. Between front side lamp and CN2 on
LAMP INVERTER Board
b. Between CN1 on LAMP INVERTER
Board and CN2026 on MOTHER Board
c. Between CN5101 on CCD Board
[FRONT] and CN2005 on MOTHER
Board
Board
d. Between CN5102 on CCD Board
[FRONT] and CN2002 on MOTHER
Board
Board
e. Between CN5103 on CCD Board
[FRONT] and CN1002 on MAIN Board
4. Replace faulty cables.
5. Replace front side lamp.
6. Replace front lamp module.
7. Replace LAMP INVERTER Board.
8. Replace Front Side Optical Unit.
9. Replace MAIN Board.
104
KV-SS905C
Click on the first or last page to see other KV-SS905C service manuals if exist.