Read Panasonic KV-S7065C (serv.man4) Service Manual online
Error Code
Possible Cause
Check Point
Remarks
Classified Code
ST1
ST2
ST3
ST4
F18
(GA-IMG
Additional
SDRAM error)
(GA-IMG
Additional
SDRAM error)
88
00
00
00
Access error to an additional
SDRAM attached to CN2007
SDRAM attached to CN2007
1.
Check whether the additional SDRAM is
attached to CN2007 properly.
Or re-attach it.
attached to CN2007 properly.
Or re-attach it.
2.
Check the SDRAM is one of the
memories recommended by PCC
memories recommended by PCC
3.
Check the soldering condition of the Gate
Array (IC2047) and its surrounding circuit
on the INTERFACE Board to repair it.
Array (IC2047) and its surrounding circuit
on the INTERFACE Board to repair it.
4.
Check the soldering condition of the
CN2007 (for the SDRAM) and its
surrounding circuit on the INTERFACE
Board to repair it.
CN2007 (for the SDRAM) and its
surrounding circuit on the INTERFACE
Board to repair it.
5.
Replace faulty parts or INTERFACE
Board.
Board.
F31
(Analogue IC
Error)
(Analogue IC
Error)
95
00
00
00
Access error to Analogue IC
1.
Check the soldering condition of the
IC1010 to IC1013 and its surrounding
circuit on the CONTROL Board to repair
it.
IC1010 to IC1013 and its surrounding
circuit on the CONTROL Board to repair
it.
2.
Check the soldering condition of the
IC1024 and its surrounding circuit on the
CONTROL Board to repair it.
IC1024 and its surrounding circuit on the
CONTROL Board to repair it.
3.
Replace faulty parts or CONTROL Board.
F32
(SCSI IC Error)
(SCSI IC Error)
96
00
00
00
Access error to SCSI Controller
1.
Check the connection and soldering
condition between CN2000 (INTERFACE
Board) and CN1000 (CONTROL Board).
condition between CN2000 (INTERFACE
Board) and CN1000 (CONTROL Board).
2.
Check the soldering condition of the SCSI
Controller (IC2029) and surrounding circuit
on the INTERFACE Board to repair it.
Controller (IC2029) and surrounding circuit
on the INTERFACE Board to repair it.
3.
Check the soldering condition of the
Address Decoder (IC1032: especially 15
Address Decoder (IC1032: especially 15
th
pin) and its surrounding circuit on the
CONTROL Board to repair it.
CONTROL Board to repair it.
4.
Replace faulty parts or boards (CONTROL
or INTERFACE).
or INTERFACE).
F33
(USB IC Error)
(USB IC Error)
97
00
00
00
Access error to USB Controller
1.
Check the connection and soldering
condition between CN2000 (INTERFACE
Board) and CN1000 (CONTROL Board).
condition between CN2000 (INTERFACE
Board) and CN1000 (CONTROL Board).
2.
Check the soldering condition of the USB
Controller (IC2031) and its surrounding
circuit on the INTERFACE Board to repair
it.
Controller (IC2031) and its surrounding
circuit on the INTERFACE Board to repair
it.
3.
Check the soldering condition of the
Address Decoder (IC1032: especially 14
Address Decoder (IC1032: especially 14
th
pin) and its surrounding circuit on the
CONTROL Board to repair it.
CONTROL Board to repair it.
4.
Replace faulty parts or boards (CONTROL
or INTERFACE).
or INTERFACE).
F34
(EEPROM Error)
(EEPROM Error)
98
00
00
00
Access error to EEPROM
1.
Check the soldering condition of the
EEPROM (IC1023) and its surrounding
circuit on the CONTROL Board to repair
it.
EEPROM (IC1023) and its surrounding
circuit on the CONTROL Board to repair
it.
2.
Check the soldering condition of the CPU
(IC1024: 113, 114, 115
(IC1024: 113, 114, 115
th
pins) and its
surrounding circuit on the CONTROL
Board to repair it.
Board to repair it.
3.
Replace faulty parts or CONTROL Board.
F36
(GA-SEN (Front)
SDRAM Error)
(GA-SEN (Front)
SDRAM Error)
9A
xx
00
00
Access error to SDRAM (IC2006,
IC2007, IC2008)
IC2007, IC2008)
1.
Check the soldering condition of the Gate
Array GA-SEN (IC2045) and its
surrounding circuit on the INTERFACE
Board to repair it.
Array GA-SEN (IC2045) and its
surrounding circuit on the INTERFACE
Board to repair it.
2.
Check the soldering condition of the
SDRAM (IC2006, IC2007, IC2008) and its
surrounding circuit on the INTERFACE
Board to repair it.
SDRAM (IC2006, IC2007, IC2008) and its
surrounding circuit on the INTERFACE
Board to repair it.
3.
Replace faulty parts or INTERFACE
Board.
Board.
F37
(Overrun Error)
(Overrun Error)
9B
01
xx
xx
Overrun error during image scanning
process
process
1.
Confirm the firmware version.
122
KV-S7065CSERIES
Click on the first or last page to see other KV-S7065C (serv.man4) service manuals if exist.