Read Panasonic KV-S3065CL / KV-S3065CW (serv.man3) Service Manual Supplement online
3 "SECTION 7 MAINTENANCE"
3.1. "Section 7.1 Maintenance Chart"
C: Clean
R: Replace
(×1000 sheets)
Description
Reference of Part No.
20
40
60
80~260
280
300
Paper Feed Roller
Ref. No.12 in Sec.14.5
C
C
C
Clean each part every
20 (×1000) sheets’
scanning
20 (×1000) sheets’
scanning
C
R
Separation Roller
Ref. No.1 in Sec.14.5
C
C
C
C
R
Retard Roller
Ref. No.30 in Sec.14.3
C
C
C
C
R
Drive Roller 1
Ref. No.63 in Sec.14.3
C
C
C
C
C
Drive Roller 2
Ref. No.63 in Sec.14.3
C
C
C
C
C
Drive Roller 3
Ref. No.63 in Sec.14.3
C
C
C
C
C
Conveyor Roller 1
Ref. No.64 in Sec.14.3
C
C
C
C
C
Conveyor Roller 2
Ref. No.64 in Sec.14.3
C
C
C
C
C
Conveyor Roller 3
Ref. No.64 in Sec.14.3
C
C
C
C
C
Exit Roller
Ref. No.31 in Sec.14.5
C
C
C
C
C
Straight Exit Roller
Ref. No.64 in Sec.14.3
C
C
C
C
C
Free Rollers 1
Ref. No.96 in Sec.14.5
C
C
C
C
C
Free Rollers 2
Ref. No.41 in Sec.14.4
Ref. No.41 in Sec.14.5
Ref. No.41 in Sec.14.5
C
C
C
C
C
Image Sensor Cover (F)
Ref. No.98 in Sec.14.5
C
C
C
C
C
(B)
Ref. No.24 in Sec.14.4
C
C
C
C
C
Paper Sensor
Ref. No.40 in Sec.14.1
C
C
C
C
C
Waiting Sensor (Board)
Ref. No.90 in Sec.14.5
C
C
C
C
C
Skew (L) Sensor
(on the WAITING SENSOR Board)
Ref. No.90 in Sec.14.5
C
C
C
C
C
Skew (R) Sensor (Board)
Ref. No.89 in Sec.14.5
C
C
C
C
C
Starting Sensor (Board)
Ref. No.51 in Sec.14.5
C
C
C
C
C
Paper Jam Sensor (Board)
Ref. No.28 in Sec.14.4
C
C
C
C
C
Ending (Front) Sensor (Board)
Ref. No.24 in Sec.14.5
C
C
C
C
C
Ending (Rear) Sensor (Board)
Ref. No.31 in Sec.14.4
C
C
C
C
C
Double Feed Detector (G)
Ref. No.91 in Sec.14.5
C
C
C
C
C
Double Feed Detector (R)
Ref. No.3 in Sec.14.4
C
C
C
C
C
Reflector Sheets
Ref. No.87 in Sec.14.3
Ref. No.20 in Sec.14.4
Ref. No.20 in Sec.14.4
C
C
C
C
C
Caution:
The Image Sensor Covers (F) and (B) or their surroundings may be hot after scanning a lot of documents continuously.
Be sure to allow the inside of the scanner to cool down before performing any maintenance or coming in contact with
the inside of the unit.
Be sure to allow the inside of the scanner to cool down before performing any maintenance or coming in contact with
the inside of the unit.
Note 1:
The above roller maintenance values are registered in the maintenance counter (Refer to Section 9), and the PC will
inform users the cleaning or replacing timing if the utility software in this scanner has been already installed and
started up.
inform users the cleaning or replacing timing if the utility software in this scanner has been already installed and
started up.
Note 2:
The maintenance schedule was determined according to paper standards (A4 or Letter, 16 lb. copier paper), which can
vary greatly between users. Therefore, the values can also vary.
vary greatly between users. Therefore, the values can also vary.
5
KV-S3065CLSERIES / KV-S3065CWSERIES
Click on the first or last page to see other KV-S3065CL / KV-S3065CW (serv.man3) service manuals if exist.