Read Panasonic KV-S1045C Service Manual online
20
7.2.2.
Cleaning
According to the instructions in the following figures (Fig. 7.2.2-1 and Fig. 7.2.2-2), wipe off the dirt from the surface of
each part to maintain the performance of the scanner.
(Fig. 7.2.1-1): Cleaning Parts and Action
Note:
*1
Roller Cleaning Paper
(1) Open the bag on the dotted line and take out the Roller Cleaning Paper.
(2) If the bag is left open for a long period of time before using it, the alcohol will evaporate.
Please use the Roller Cleaning Paper immediately after opening the bag.
(3) The Roller Cleaning Paper (Model No. KV-SS03) is available from your sales representative.
Please use the Roller Cleaning Paper immediately after opening the bag.
(3) The Roller Cleaning Paper (Model No. KV-SS03) is available from your sales representative.
Note:
*2
ADF Door
When the ADF Door does not open even if the ADF Door Release is pushed repeatedly, there is possibility
that the door was not closed properly. In this case, try to close the ADF Door until it clicks into place.
that the door was not closed properly. In this case, try to close the ADF Door until it clicks into place.
Maintenance Parts
Action Code
Action
Comments
Paper Feed Roller
C
Clean each surface with Roller
Cleaning Paper (Model No.
KV-SS03).
Cleaning Paper (Model No.
KV-SS03).
1. How to deal with the
Roller Cleaning Paper and
others
others
→
See Note
*1
and Note
*2
.
2. Cleaning position
→
See Fig. 7.2.2-2.
After cleaning the Paper Feed and
Double-feed Prevention Rollers,
execute “Clear Counter” for
cleaning roller with Service Utility.
(See 9.3.)
(See 9.3.)
Double-feed Prevention Roller
C
Conveyor Roller
C
Exit Roller
C
Free Roller
C
Scanning Glass (F)
C
Scanning Glass (B)
C
Double Feed Detector (Generator)
S
Sweep the dirt off the detector
with a cotton swab.
with a cotton swab.
Double Feed Detector (Receive)
S
Click on the first or last page to see other KV-S1045C service manuals if exist.