KV-S1037X - Panasonic Other Service Manuals Service Manual (repair manual). Page 14

14

The status of the scanner is displayed by the LED 

 (Red),  the LED

 (Green),  and the LED

as shown in the table below:

OFF

OFF

Power OFF

*1

OFF

ON

Ready mode or Scanning

OFF

Blinking (Fast)

Warming up

OFF

Blinking (Fast, 2 times consecutively)

Double Feed Skip mode

OFF

Blinking (Fast, 3 times consecutively)

Dog-ear detection skip mode

OFF

Blinking (Slow)

Sleep mode

*2

 or Cleaning mode

Blinking (Slow)

ON

Notification mode

Blinking (Slow)

Blinking (Slow)

Blinking (Fast)

OFF

Network Error

*3

OFF

ON

Not connected, or wireless LAN ON/OFF switch is OFF.

ON

OFF

Error

*3

*1

If the power off feature in sleep mode is enabled, and if no operation is performed for a certain period of time, the scanner will be
turned off automatically. Press the power button (

) of the scanner to turn it on. You can enable/disable the power off feature, and

change the time until the scanner turns off in User Utility or Configuration Web. Refer to 16. Appendix (Operating Manual P.56).

*2

If no operation is performed for 15 minutes or longer, the scanner will enter sleep mode automatically to conserve energy. Press
the Start/Stop button (

) on the scanner’s operation panel to return to ready mode. The time until the scanner enters sleep

mode can be changed in User Utility or Configuration Web. Refer to 16. Appendix (Operating Manual P.56).

*3

For details about the error, see "Error Code and Error Messages". Refer to 16. Appendix (Operating Manual P.82).

 (Green),

Connected to a wireless network.
Connecting to a wireless network.
Simple AP mode

*1

*1

(Green) is turned off while LED 

is blinking (except for warming up and sleep mode). 

 (Green)

•   LED