Read Panasonic KV-S1037X Service Manual online
13
4.2.
Operation Panel
LED
(Red)
Lights when an error occurs.
LED
(Green)
Shows the scanner’s status.
Power button ( )
For details, see "Turning ON/OFF the unit's power". Refer to 16. Appendix (Operating Manual P.23).
Skip button (
)
If you press this button after a double feed is detected and scanning has been paused, the document (or
documents) detected as a double feed will be scanned, and then ejected from the scanner. Scanning will
continue after the document is scanned and ejected.
documents) detected as a double feed will be scanned, and then ejected from the scanner. Scanning will
continue after the document is scanned and ejected.
Single touch scan button 1 to 3
You can register a job to each button. For details about registering jobs, see "Using Push Scan".
Refer to 16. Appendix (Operating Manual P.42).
Refer to 16. Appendix (Operating Manual P.42).
Start/Stop button (
)
•
If you set [Wait Key] for "Manual Feed Mode" in your application software, pushing this button starts
scanning. For details about "Manual Feed Mode", refer to the Image Capture Plus, TWAIN, or ISIS
help.
scanning. For details about "Manual Feed Mode", refer to the Image Capture Plus, TWAIN, or ISIS
help.
•
During scanning, pushing this button stops scanning.
•
If you press this button after a double feed is detected and scanning has been paused, the document
(or documents) detected as a double feed will be ejected from the scanner without being scanned.
Scanning will stop.
(or documents) detected as a double feed will be ejected from the scanner without being scanned.
Scanning will stop.
1
2
2
3
5
6
7
4
LED
(Green)
Shows the wireless LAN status.
Click on the first or last page to see other KV-S1037X service manuals if exist.