Read Panasonic KV-S1025C / KV-S1020C (serv.man2) Service Manual Supplement online
8
5 “SECTION 8 DISASSEMBLY INSTRUCTIONS”
5.1.
“Section 8.3 Mechanical Block”
5.1.1.
“Section 8.3.5 Optical Unit (F)”
(1) Remove the Rear Cover. (See 8.2.5.)
(2) Remove the CONTROL Board. (See 8.4.4.)
(3) Release the connector cables from the clamps inside and
outside of the Base Plate.
(4) Remove the 5 screws and the screw with the FG cable.
outside of the Base Plate.
(4) Remove the 5 screws and the screw with the FG cable.
(5) Remove the Base Plate, paying attention to the contact
between the cables and the plate edge.
between the cables and the plate edge.
(6) Remove the Ground (Earth) Plate 2.
(7) Release the cable from the clamp, and disconnect the CCD
Board (F) connector.
Board (F) connector.
(8) Remove the 2 screws.
(9) Remove the Optical Unit Covers FL and FR.
(Only for Product Version B or later)
(Only for Product Version B or later)
Click on the first or last page to see other KV-S1025C / KV-S1020C (serv.man2) service manuals if exist.