Read Panasonic F-VXL40R-S Service Manual online
13
2. Remove the humidity sensor. (1 screw)
3. Disconnect the lead wire connector connected to the
3. Disconnect the lead wire connector connected to the
humidity sensor.
4. Remove the nanoe lead wire from the wiring termination
rib.
5. Remove the lead switch.
*Be careful of handling the lead switch because its
glass tube is easily broken.
6. Remove 7 screws in the figure and remove the casing
cover.
5.2.6.
Disassembling the nanoe unit
1. Remove 1 screw in the figure and remove nanoe unit.
Click on the first or last page to see other F-VXL40R-S service manuals if exist.