VW-CLT1P, VW-CLT1E, VW-CLT1GK - Panasonic Movie Service Manual (repair manual). Page 4

Read Panasonic VW-CLT1P / VW-CLT1E / VW-CLT1GK Service Manual online

4
When using for the first time, be sure to adjust the 3D Conversion Lens attachment position.
Change the mode to
on the video camera
.
1
Attach the 3D Conversion Lens to the
video camera.
2
Turn on the video camera.
Turn on with the video camera in a horizontal state.
The 3D Conversion Lens adjustment mode screen
will appear automatically after performing the initial
setting.
If the 3D Conversion Lens adjustment mode
screen does not appear automatically, set from
the menu on the video camera.
([SETUP]
[3D CONV. LENS SETUP])
3
Attach the lens front cap to the 3D
Conversion Lens.
Guide Line
2 screens will appear.
The horizontal line for adjustment on the lens front
cap is displayed on the screen.
4
Touch [ADJUST].
If the black vertical line and the black horizontal line
are within the red guidelines  and adjustment is not
required, touch [EXIT] and proceed to Step 11.
Perform the adjustment in a bright location where the
horizontal line for adjustment will be clearly visible.
Adjust the attachment position and record
5
Open the adjustment dial cover.
When turning the adjustment dials, hold the video
camera in the palm of your hand from the bottom and
operate with the fingers of your other hand without
applying too much force from above. When checking
the adjustment, check with your fingers off the
adjustment dials.
6
(After checking the operation description, touch
[NEXT].)
Adjust the horizontal position by
rotating the horizontal image position
adjustment dial
to place the black
vertical line between the images at right
and left in between the red guidelines
.
The black vertical line may look thick or blurred, but
adjust it so it goes in between the guidelines.
Touch [NEXT].
Page of 13
Display

Click on the first or last page to see other VW-CLT1P / VW-CLT1E / VW-CLT1GK service manuals if exist.