Read Panasonic VW-CLT1P / VW-CLT1E / VW-CLT1GK Service Manual online
ORDER NO. VO1101001CE
B27
3D Conversion Lens
Model No.
VW-CLT1P
VW-CLT1E
VW-CLT1GK
VW-CLT1E
VW-CLT1GK
Colour
(H)...........Gray Type
(H)...........Gray Type
4
TABLE OF CONTENTS
PAGE
PAGE
1 Specifications ----------------------------------------------------- 2
2 Location of Controls and Components ------------------- 3
3 Troubleshooting Guide ----------------------------------------- 6
4 Disassembly and Assembly Instructions ---------------- 7
2 Location of Controls and Components ------------------- 3
3 Troubleshooting Guide ----------------------------------------- 6
4 Disassembly and Assembly Instructions ---------------- 7
4.1. Disassembly Flow Chart --------------------------------- 7
4.2. Disassembly Procedure---------------------------------- 7
4.2. Disassembly Procedure---------------------------------- 7
5 Exploded View and Replacement Parts List -----------11
5.1. Casing Parts Section ------------------------------------ 11
5.2. Packing & Accessories Section -----------------------12
5.3. Replacement Parts List ---------------------------------13
5.2. Packing & Accessories Section -----------------------12
5.3. Replacement Parts List ---------------------------------13
2
1 Specifications
3
2 Location of Controls and Components
1
Attachment screw
2
Protective glass (front)
3
Lens
4
Adjustment dial cover
5
Protective glass (rear)
6
Camera body attachment part (convex)
1
3
2
6
4
5
7
Vertical position adjustment dial
8
Vertical alignment adjustment dial
9
Horizontal image position adjustment dial
Lens front cap
10 Horizontal line for adjustment
7
8
9
8
9
10
4
When using for the first time, be sure to adjust the 3D Conversion Lens attachment position.
●
Change the mode to
on the video camera
.
1
Attach the 3D Conversion Lens to the
video camera.
video camera.
2
Turn on the video camera.
●
Turn on with the video camera in a horizontal state.
●
The 3D Conversion Lens adjustment mode screen
will appear automatically after performing the initial
setting.
●
If the 3D Conversion Lens adjustment mode
screen does not appear automatically, set from
the menu on the video camera.
([SETUP]
screen does not appear automatically, set from
the menu on the video camera.
([SETUP]
[3D CONV. LENS SETUP])
3
Attach the lens front cap to the 3D
Conversion Lens.
Conversion Lens.
Guide Line
●
2 screens will appear.
●
The horizontal line for adjustment on the lens front
cap is displayed on the screen.
4
Touch [ADJUST].
●
If the black vertical line and the black horizontal line
are within the red guidelines and adjustment is not
required, touch [EXIT] and proceed to Step 11.
●
Perform the adjustment in a bright location where the
horizontal line for adjustment will be clearly visible.
Adjust the attachment position and record
5
Open the adjustment dial cover.
●
When turning the adjustment dials, hold the video
camera in the palm of your hand from the bottom and
operate with the fingers of your other hand without
applying too much force from above. When checking
the adjustment, check with your fingers off the
adjustment dials.
6
(After checking the operation description, touch
[NEXT].)
[NEXT].)
Adjust the horizontal position by
rotating the horizontal image position
adjustment dial
rotating the horizontal image position
adjustment dial
to place the black
vertical line between the images at right
and left in between the red guidelines
and left in between the red guidelines
.
●
The black vertical line may look thick or blurred, but
adjust it so it goes in between the guidelines.
●
Touch [NEXT].