Read Panasonic VDR-M30PP / VDR-M30EG / VDR-M30B / VDR-M30EN Service Manual Supplement online
2 ADDITION OF CAUTION FOR RESSEMBLY
(9)
Disc Cover (Figs. 5-3-10, 5-3-11, 5-3-11a)
1) Move the lock arm (b) in the direction of the arrow to open the disc cover (a).
2) Open the card slot cover (c).
3) Disconnect the flat cable (e) from MAN circuit board (d).
4) Remove four screws [D].
5) Remove the disc cover in the direction of the arrow: Be careful not to damage the flat cable (e)
that extends from the disc cover.
Procedure and caution for reassembly
1) Reinstall the disc cover so that the hinge
1
of R case fits into portion
2
at the inside top of disc
cover. (Fig. 5-3-11)
2) When attaching the disc cover to the flange of R case, take care with the switch inside the cover:
If the cover is tilted, the switch may be broken. (Fig. 5-3-11a)
3) Pass the flat cable (e) extending from the disc cover through the gap between frame (g) and R
case (h), and then connect it to the MAN circuit board (d). (Fig. 5-3-11)
Fig. 5-3-10 Disc Cover
(b)
(d)
3
(a)
2
(c)
3-1
3-2
1
(a) Disc Cover
(b) Lock Arm
(c) Card Slot Cover
(d) MAN Circuit Board
(e) Flat Cable
(f) Hinge of R Case
(g) Frame
(h) R Case
(j) Disc Drive Unit
(k) Loader
(b) Lock Arm
(c) Card Slot Cover
(d) MAN Circuit Board
(e) Flat Cable
(f) Hinge of R Case
(g) Frame
(h) R Case
(j) Disc Drive Unit
(k) Loader
[D] M1.6×2.5 (Black)
5.3. Disassembly
Fig. 5-3-11a Disc Cover
(a)
SWITCH
NG
NG
OK
Fig. 5-3-11 Disc Cover
4 [D]
4 [D]
(a)
(c)
5
(f)
(a)
(e)
(d)
(k)
(g)
(h)
(j)
(e)
1
2
(f)
(It added a document.)
(It added the number of the figure.)
(It added an illustration.)
5
VDR-M30PP / VDR-M30EG / VDR-M30B / VDR-M30EN
Click on the first or last page to see other VDR-M30PP / VDR-M30EG / VDR-M30B / VDR-M30EN service manuals if exist.