NV-DS55EG, NV-DS55B, NV-DS55DEN, NV-DS55A - Panasonic Movie Service Manual (repair manual). Page 25

Luminance: 1,900 cd/m

2

 (Luminance conversion: 

≈

 5,900

lux) (Rate compared with conventional models: 2.4 times*)
Life: Over 1,000 hours (Rate compared with conventional
models: Over 10 times)

Specific volume compared with conventional models:
Approx. 65%*

*Not including camera stand

Attachment of Collimator
(Collimator: Infinity Adjustment Lens)

It is possible to screw up a collimator to the Light Box.
And it is very easy to compensate for the slant (shear of
the optical axis) caused by the weight of the collimator
itself.

For easy and quick replacement of the charts, the light box
is equipped with the slot and the chart holder.
Also, it is equipped with the slots for optical filters, one for
color temperature conversion filters, and one for color
compensation filters.
It is very convenient to set up for a color condition
according to adjustment procedure.

To prevent the temperature from rising inside the Light Box
and to extend the life of the lamp, it is equipped.

                                                           

                                                                                                                   

       

               

                                                                                                         

DC power supply:
      More than 2 A at 12 V
Compact transmission chart:
   HP Gray-scale: VFK1164TDVGS
   HP Color bar:  VFK1164TDVCB
Camera stand:    VFK1164TST01
Optical filters (Made by Triacetyl Cellulose):
      Color balancing filter: Commercially available
   Color compensating filter: Commercially available

1. Attach one camera stand to the bottom of the Light Box

and attach the other one to the tripod mount at the bottom
of the camcorder. Next, adjust the height of each camera
stand (using coarse control) so that the central point of the
emission face of the Light Box aligns with the central point
of the camcorder s lens.

2. Detach the end of the collimator (Infinity Adjustment Lens).

Be sure to loosen the Light Box’s clipping knob* before
attaching the collimator to the Light Box. Screw the end of
collimator into the rotary ring on the front of the Light Box
to attach.

HP Light Box

HP Gray scale

HP Color Bar

DC cable

Chart Holder

Filter Mount (10 Sheets)

Slip-in Filter

Collimator

Chart

Camera Stand

Clipping Knob

Rotary Ring

(Part Number: VFK1164TDVLB)