Read Panasonic HDC-TM300P / HDC-TM300PC / HDC-TM300EB / HDC-TM300EC / HDC-TM300EE / HDC-TM300EF / HDC-TM300EG / HDC-TM300EP / HDC-TM300GC / HDC-TM300GK / HDC-TM300SG / HDC-SD300EG / HDC-TM300EEK Service Manual online
4
1.4.
How to Discharge the Capacitor on Sub PCB
CAUTION:
1.
Be sure to discharge the capacitor on SUB PCB.
2.
Be careful of the high voltage circuit on SUB PCB when servicing.
[Discharging Procedure]
1. Refer to the disassemble procedure and Remove the necessary parts/unit.
2. Put the insulation tube onto the lead part of Resistor (ERG5SJ102:1k
2. Put the insulation tube onto the lead part of Resistor (ERG5SJ102:1k
Ω /5W).
(an equivalent type of resistor may be used.)
3. Put the resistor between both terminals of capacitor on SUB PCB for approx. 5 seconds.
4. After discharging confirm that the capacitor voltage is lower than 10V using a voltmeter.
4. After discharging confirm that the capacitor voltage is lower than 10V using a voltmeter.
Fig. F1
Click on the first or last page to see other HDC-TM300P / HDC-TM300PC / HDC-TM300EB / HDC-TM300EC / HDC-TM300EE / HDC-TM300EF / HDC-TM300EG / HDC-TM300EP / HDC-TM300GC / HDC-TM300GK / HDC-TM300SG / HDC-SD300EG / HDC-TM300EEK service manuals if exist.