Read Panasonic SR-TMJ181BTW Service Manual online
- 12 -
SR-TMJ181
5.3 Control Unit A
1. Use screwdriver take off Hinge Cover.
(PIC-1)
(PIC-1)
PIC-1
PIC-3
PIC-2
PIC-4
PIC-6
PIC-7
PIC-8
PIC-5
2. Pull out at Hinge Shaft. (PIC-2)
3. Pull out at Wiring of Lid Heater and then
pull out Outer Lid Assy. (PIC-3)
pull out Outer Lid Assy. (PIC-3)
4. Loosen screw at Bottom Frame and
Body. (PIC-4)
Body. (PIC-4)
5. Loosen screws at Bottom Frame and
PCB Base. (PIC-5)
PCB Base. (PIC-5)
6. Use screwdriver pry up between Bottom
Frame with Body.
Frame with Body.
7. Take off Body with Bottom Frame.
(PIC-6)
(PIC-6)
8. Lossen screw of Wiring. (PIC-7)
9. Loosen screw of PCB Control with
P.C.B. Base. (PIC-8)
P.C.B. Base. (PIC-8)
Click on the first or last page to see other SR-TMJ181BTW service manuals if exist.