SR-DF101WTQ, SR-DF181 - Panasonic Home Appliance Service Manual (repair manual). Page 12

17

6  QUICK CHECK TEST OF THE CONTROL BOARD

Before beginning diagnostic evaluation of a problem, perform a quick check test of the control board, as explained below. If anything 
abnormal, then perform reset operation once (refer to P11)
If still abnormal, please refer to the problem diagnosis table Vol. 2. (P9) and diagnosis methods for defective components (P10) ), to 
exchange the parts on P.C.B or control board comp.

1

Connect the unit to a power source. In stand-by mode, using three fi ngers simultaneously press and hold [Start], [Off], [White 
Rice] buttons.

[Figure A]

2

As soon as you release the three buttons, as shown in Fig. B on the right, [Quick Cook/Steam] indicator lights up, and press [Quick 
Cook/Steam] button.

[Figure B]

3

Repeat according to the sequence of: Quick Cook/Steam indicator lamp

White Rice indicator lamp
indicator lamp for Brown Rice
indicator lamp for Porridge/Soup
Keep Warm indicator lamp

and then the heating becomes the full-power heating mode. When it is heated 
to the final temperature of cooking, it will automatically shift to constant 
temperature mode.

[Figure C]

4

Press [off] button once. Press other buttons and confi rm that operation is normal.

After carrying out procedures 1 to 4, if test results are normal, you can conclude that P.C.B.(Comp.) has passed the test.

IP3830_SR-DF101_Eng_19_121224.in章节1:17   章节1:17

2012-12-24   17:19:42