Read Panasonic NR-BV288 / NR-BV328 / NR-BV368 Service Manual online
6.2 Disassemble PC DOOR
6.3 Disassemble LED light
6.4 Disassemble COVER DUCT PC AS.
9
① COVER HINGE TOP
hook
② Use flat head rod to pull
COVER HINGE TOP
out
③ Disassemble connector
④ Remove 3 screws, take out
the HINGE TOP and then
disassemble the PC DOOR
screw
Notice: Apply grease to the areas
of circles of hinge center
① Use flat head rod to loosen
at 3 hook position to take
COVER LED out
② Undo connector and remove
PAS-LED PCB at the position of
hook
3 hook
Connector
hook
① Position of COVER DUCT
PC AS.
screw cover
② Use flat head rod to open
screw cover
③ Take out 3 screw then
remove COVER DUCT PC AS.
Click on the first or last page to see other NR-BV288 / NR-BV328 / NR-BV368 service manuals if exist.