Read Panasonic NR-BL267 / NR-BL307 / NR-BL347 Service Manual online
6.1.3. Defrost heater as
1. Bend the co
pper tupe lightly, raise the coil about 7cm.
2. Bend the clamp lightly then take out
the HEATER AS. DEFROST
3. Pull out the head of rubber lightly then take out
the COVER RADIANT
6.2. Provision compartment
6.2.1. Air guide
1. Take out all the tray,
CHILLED CASE and CRISPER before
remove the case air guide.
2. Unscrew, then remove the
2. Unscrew, then remove the
CASE AIR GUIDE AS follow
the direction of arrow.
3. Pull out the air guide installation and remove the A
3. Pull out the air guide installation and remove the A
G
FILTER BIO as fig 3.
6.2.2. LED lamp
1. Use the
flathead small screw driver to unhook the COVER LED follow 6 hooks on the fig 1.
2. Take out the
DIAL CONTROL
3. Unscrew, disconnect two connectors. Then can remove PAS-
BK305 (LED) and PAS-BJ175 (CONTROL)
7cm
COVER RADIANT
HEATER AS. DEFROST
1
DIAL CONTROL
hook
connector
screw
PAS-
BJ175(CONTROL)
PAS-
BK305(LED)
2
screw
INS. AIR GUIDE
3
1
2
A
G FILTER BIO
1
12
Click on the first or last page to see other NR-BL267 / NR-BL307 / NR-BL347 service manuals if exist.