Read Panasonic NN-GF574MZPE Service Manual online
3. Disconnect connector CN701 from H.V. Inverter board.
4. Remove 6 screws holding D.P.C. board on escutcheon
4. Remove 6 screws holding D.P.C. board on escutcheon
base.
5. Separate D.P.C board from tabs on the escutcheon base
and remove D.P.C board.
To replace membrane key board
To replace membrane key board
6. Use tools such as kinfe etc. to lift the edge of membrane
sheet and peel off escutcheon sheet & key board
membrane completely from escutcheon base.
NOTE:
membrane completely from escutcheon base.
NOTE:
a. The membrane key board is attached to the
escutcheon base with double faced adhesive tape.
Therefore, applying hot air such as using a hair dryer
is recommended for smoother removal.
Therefore, applying hot air such as using a hair dryer
is recommended for smoother removal.
b. When installing the new key board membrane, make
sure that the surface of escutcheon base is clean to
prevent a malfunction or shorted contacts.
prevent a malfunction or shorted contacts.
12
NN-GF574M
Click on the first or last page to see other NN-GF574MZPE service manuals if exist.