Read Panasonic NN-DS592MZPE Service Manual online
6.5. Fan motor
1. Disconnect 2 lead wires from fan motor terminals.
2. Remove 4 screws holding inverter reinforcement bracket A
2. Remove 4 screws holding inverter reinforcement bracket A
on right heater panel and base, then remove inverter
reinforcement bracker A
reinforcement bracker A
3. Remove 2 screws holding fan motor and detach fan motor
from oven assy.
4. Remove fan blade from fan motor shaft by pulling it straight
out.
6.6. Heater
6.6.1. Upper heater (Heater BU, Heater
CU)
1. Disconnect lead wires from left side of upper heater.
2. Remove 1 screw holding link bar on the left side of upper
heater.
3. Remove the heater by pulling it out from the left side of the
oven.
6.6.2. Lower heater (Heater AU)
1. Remove base plate (see page 19).
NOTE:
Step same as disassembly of Heater DU step 1 to step
9.
9.
2. Disconnect lead wire from the right side of lower heater.
3. Remove 1 screw holding link bar on the left side of lower
3. Remove 1 screw holding link bar on the left side of lower
heater terminal.
17
NN-DS592M
Click on the first or last page to see other NN-DS592MZPE service manuals if exist.