Read Panasonic NC-PH22WTW / NC-PH30WTW Service Manual online
- 14 -
4.7 How to remove Decoration
panel (Display Part)
panel (Display Part)
Open (A point) with minus screwdriver of small
pin.
pin.
FIG. 8
FIG. 9
4.8 Peg frame
1. Remove body follow the instruction.
2. Remove bottom ring upside with minus
screwdriver or etc.
3. Remove 1 screw off.
4. Use minus screwdriver to pry between 2 ribs
of peg frame and body, and then push out
peg frame with thumb, then pull it off.
2. Remove bottom ring upside with minus
screwdriver or etc.
3. Remove 1 screw off.
4. Use minus screwdriver to pry between 2 ribs
of peg frame and body, and then push out
peg frame with thumb, then pull it off.
FIG. 9
Bottom ring
Peg frame
Tapping screw
(M4 x 12)
(M4 x 12)
Minus
screwdriver
screwdriver
4
NC-PH22, NC-PH30
Click on the first or last page to see other NC-PH22WTW / NC-PH30WTW service manuals if exist.