Read Panasonic NC-PH22WTW / NC-PH30WTW Service Manual online
- 11 -
1. Remove 1 screw off.
2. Remove bushing from water pipe packing A
and container comp.
3. Remove feed water pipe from communicating
bushing.
2. Remove bushing from water pipe packing A
and container comp.
3. Remove feed water pipe from communicating
bushing.
4.3 Feed water pipe
1. Remove 2 screws of cover plate.
2. Remove white, orange and yellow lead wire
of heater terminal.
3. Remove cover plate from container.
4. Remove thermal fuse comp. from cover
plate.
5. Remove hold spring A from cover plate.
6. Rotate thermistor assy. 90
2. Remove white, orange and yellow lead wire
of heater terminal.
3. Remove cover plate from container.
4. Remove thermal fuse comp. from cover
plate.
5. Remove hold spring A from cover plate.
6. Rotate thermistor assy. 90
° to remove it.
4.4 Thermal fuse comp. and
Thermistor comp.
Thermistor comp.
Tapping screw
(M4 x 8)
(M4 x 8)
Feed water pipe
Communicating
bushing
bushing
Water pipe
packing A
packing A
Tapping screw (M4 x 8)
Thermistor
assy.
assy.
Hold spring A
Thermal fuse
comp.
comp.
Container
comp.
comp.
Cover plate
Heater
terminal
terminal
Water pipe
comp.
comp.
Container
comp.
comp.
FIG. 4
FIG. 3
Operating point
Careful thermistor leans when assemble with
cover plate.
cover plate.
Do not forget to put compound.
Remove white, orange and yellow lead wires
with wrench.
with wrench.
NC-PH22, NC-PH30
Click on the first or last page to see other NC-PH22WTW / NC-PH30WTW service manuals if exist.