Read Panasonic NC-PF30PV Service Manual online
- 12 -
NC-PF30PV
2. Assembly and Dismantle
Detail
2.1. Bottom plate, Body
1. Remove 2 Tapping screws and 1 Truss screw from
Bottom plate.
2. Remove 1 screw and Sleeve from Body.
3. Remove white, orange Lead Wire and Earth wire
from Peg frame.
4. Remove Body off.
5. Remove Waterproof cover B.
Tapping screw
(M4 x 12)
Truss head screw
Bottom plate
Sleeve
Screw
Waterproof
cover B
Body
Waterproof
cover B
Board holder A
comp. (Bottom)
w
Lead wire assy E
(Pull to disconnect.)
Fig. 2
2.2. Board holder A comp. (Lower part)
Caution
Microcomputer in Thermo Pot, may break down by
static electricity from clothes, human body,
workbenches,etc. when touch or wonder to touch should
to ground human body with several MΩ.
Something Request
Do not do maintennance and reuse if copper pattern
on PCB is broken.
1. Remove 3 waterproof claws and then open waterproof.
2. Remove all, Connector, Fasten Terminal and Lead
Wire Assy E. which wiring on Board holder A comp.
(lower part).
Operating point
- Fasten Terminal which has stopper, should to push
arrow-point part and pull off together.
Fig. 1
Click on the first or last page to see other NC-PF30PV service manuals if exist.