Read Panasonic MC-E7305 / MC-E7303 / MC-E7301 Service Manual online
5.3. Removing upper body cover
1. Remove the mounting screws (4 pieces), and remove the
upper body cover. (Fig. 6)
2. Disconnect the lead wire connector of the power control
from the power board and remove upper body cover.
(Fig. 7)
5.4. Removing power control
1. Pull off the power control knob.
2. Remove the fastening nuts with hex. socket wrench and
remove the power control from upper body cover. (Fig. 8)
3. < Attaching power control >
Engage the stopper of the power control into the groove on
the rear side of the upper body cover, and fasten the power
control with the fastening nuts. (Fig. 9)
the rear side of the upper body cover, and fasten the power
control with the fastening nuts. (Fig. 9)
4. < Attaching knob >
As shown in the figure, position the cut surface of the power
control shaft and push in the knob aligning with the mark of
the upper body cover. (Fig. 10)
control shaft and push in the knob aligning with the mark of
the upper body cover. (Fig. 10)
9
MC-E7305 / MC-E7303 / MC-E7301
Click on the first or last page to see other MC-E7305 / MC-E7303 / MC-E7301 service manuals if exist.