Read Panasonic ES-RT53-S520 / ES-RT33-S520 Service Manual online
ES-RT33/ES-RT53
6
4.2.
Cautions in Assembly
NOTE:
When reassembling, replace the new waterproof rubber.
Make sure whether there is NO foreign substance sticking
around a part covered with water seal.
Make sure whether there is NO foreign substance sticking
around a part covered with water seal.
4.2.1.
Motor
Insert the tube into the projection of the housing and set the
tube holder firmly. Then hook the motor holder to the housing
and put the float springs properly.
tube holder firmly. Then hook the motor holder to the housing
and put the float springs properly.
4.2.2.
Module
Align the projection of switch select button on housing A with
the groove of switch plate on module.
the groove of switch plate on module.
4.2.3.
Rechargeable batteries
Insert the rechargeable batteries into chassis. Attach the bat-
tery o-ring and washer to the battery.
tery o-ring and washer to the battery.
Put the battery assembly from the battery terminal side into
housing A, and insert the motor side into housing A.
NOTE:
housing A, and insert the motor side into housing A.
NOTE:
While setting the battery assembly, pull the lead wires out in
order to prevent pinching. Then press fit the lead wires
neatly.
order to prevent pinching. Then press fit the lead wires
neatly.
4.2.4.
Driving bars
Set the trimmer driving bar and the slit blade driving bar.
Click on the first or last page to see other ES-RT53-S520 / ES-RT33-S520 service manuals if exist.