Read Panasonic ES-RT53-S520 / ES-RT33-S520 Service Manual online
Order Number SD1206E38CE
Rechargeable Shaver
Model No.
ES-RT53
ES-RT33
ES-RT33
Europe
CIS
CIS
TABLE OF CONTENTS
PAGE
PAGE
1 Warning -------------------------------------------------------------- 2
2 Specifications ----------------------------------------------------- 2
3 Troubleshooting Guide ----------------------------------------- 3
2 Specifications ----------------------------------------------------- 2
3 Troubleshooting Guide ----------------------------------------- 3
3.1. Main unit and charging adaptor ------------------------ 3
4 Disassembly and Assembly Instructions ---------------- 4
4.1. Disassembly Instructions -------------------------------- 4
4.2. Cautions in Assembly ------------------------------------ 6
4.2. Cautions in Assembly ------------------------------------ 6
5 Schematic Diagram ---------------------------------------------- 8
5.1. ES-RT53 ----------------------------------------------------- 8
5.2. ES-RT33 ----------------------------------------------------- 8
5.2. ES-RT33 ----------------------------------------------------- 8
6 Exploded View and Replacement Parts List ------------ 9
6.1. Exploded View for ES-RT53 ---------------------------- 9
6.2. Replacement Parts List ---------------------------------10
6.3. Exploded View for ES-RT33 ---------------------------11
6.4. Replacement Parts List ---------------------------------12
6.2. Replacement Parts List ---------------------------------10
6.3. Exploded View for ES-RT33 ---------------------------11
6.4. Replacement Parts List ---------------------------------12
ES-RT33/ES-RT53
2
1 Warning
Caution:
• Pb free solder has a higher melting point that standard solder; Typically the melting point is 50 - 70
°F (30 - 40°C) higher. Please
use a soldering iron with temperature control and adjust it to 750 ± 20
°F (400 ± 10°C). In case of using high temperature solder-
ing iron, please be careful not to heat too long.
• Pb free solder will tend to splash when heated too high (about 1100
°F / 600°C).
2 Specifications
ES-RT33/ES-RT53
3
3 Troubleshooting Guide
3.1.
Main unit and charging adaptor
ES-RT33/ES-RT53
4
4 Disassembly and Assembly Instructions
4.1.
Disassembly Instructions
Follow the procedure below to disassemble the main unit.
1. Remove the protective cap, the foil frame with outer foil
and the inner blade.
2.
NOTE: If you do not replace the trimmer or trimmer
handle, skip to No.4.
Slide the trimmer handle and unhook the trimmer handle
by inserting something like a slotted screwdriver or plastic
spatula into a slit.
NOTE:
by inserting something like a slotted screwdriver or plastic
spatula into a slit.
NOTE:
In order to prevent the scratch or damage on the
housing, use the cushion under the screwdriver.
housing, use the cushion under the screwdriver.
3. Loosen a screw and remove the bottom cover.
4. To remove the side panels, insert a small slotted screw-
driver into the housing and unhook.