Read Panasonic ES-ED20-V520 / ES-ED50-N520 / ES-ED70-G520 / ES-ED90-P520 Service Manual online
Order Number PCD1301X30CE
Epilator
Model No.
ES-ED90
ES-ED70
ES-ED50
ES-ED20
ES-ED70
ES-ED50
ES-ED20
Europe
CIS
CIS
TABLE OF CONTENTS
PAGE
PAGE
1 Warning -------------------------------------------------------------- 2
2 Specifications ----------------------------------------------------- 2
3 Troubleshooting Guide ----------------------------------------- 3
4 Schematic Diagram ---------------------------------------------- 4
5 Exploded View and Replacement Parts List ------------ 5
2 Specifications ----------------------------------------------------- 2
3 Troubleshooting Guide ----------------------------------------- 3
4 Schematic Diagram ---------------------------------------------- 4
5 Exploded View and Replacement Parts List ------------ 5
2
1 Warning
Caution:
• Pb free solder has a higher melting point that standard solder; Typically the melting point is 50 - 70
°F (30 - 40°C) higher. Please
use a soldering iron with temperature control and adjust it to 750 ± 20
°F (400 ± 10°C). In case of using high temperature solder-
ing iron, please be careful not to heat too long.
• Pb free solder will tend to splash when heated too high (about 1100
°F / 600°C).
2 Specifications
3
3 Troubleshooting Guide
3.1.
CHECK MAIN BODY AND ADAPTOR
NOTE: When charging, the unit does not operate even switching ON.
4
3.2.
CHECK MAIN BODY AND ADAPTOR
1. Confirm the smooth operation when switching ON and OFF.
2. Confirm if the motor and disc may rotate when holding the disc slightly.
3. Confirm if there is no dirt or scratch.
4. Confirm if the main unit may operate approximately 40 minutes after fully charging.
2. Confirm if the motor and disc may rotate when holding the disc slightly.
3. Confirm if there is no dirt or scratch.
4. Confirm if the main unit may operate approximately 40 minutes after fully charging.
4 Schematic Diagram