Read Panasonic ER-GC71-S520 / ER-GC51-K520 Service Manual online
ER-GC71/ER-GC51
6
4.2.
Assembly method
1. Rechargeable battery
Insert the rechargeable battery to the module assembly.
*Make sure to attach the washer and O-ring to the bat-
tery terminal.
*Make sure to apply the grease (FLOIL G741S).
*Make sure to attach the washer and O-ring to the bat-
tery terminal.
*Make sure to apply the grease (FLOIL G741S).
2. Motor
Check the direction, and install the motor to motor holder.
3. Driving frame
Assemble the motor block and module assembly with bat-
tery to the housing B. At the first insert the motor block,
then insert the terminals for module assembly.
*Put the leads between the module assembly and the
motor block to prevent the pinching the housings.
tery to the housing B. At the first insert the motor block,
then insert the terminals for module assembly.
*Put the leads between the module assembly and the
motor block to prevent the pinching the housings.
4. O-ring for housing
Apply the grease (FLOIL G741S) on O-ring for housing.
Fit the projection of O-ring with the hole of housing.
Fit the projection of O-ring with the hole of housing.
Click on the first or last page to see other ER-GC71-S520 / ER-GC51-K520 service manuals if exist.