Read Panasonic EH-NE70 / EH-NE60 Service Manual online
6
4.2.
Caution In Assembly
Refer to WIRING DIAGRAM to solder the wires
1. Confirm that there are the aluminum seals (6.0x6.0) on
the both housings, before installing the discharge elec-
trodes between the ribs.
trodes between the ribs.
2. Arrange the wires between the ribs. Then stick the poly-
ester tape (20.0x30.0) on a rib not to exceed the first rib
as shown in the following.
as shown in the following.
3. Attach the heater motor block to housing B by installing
the plates between the ribs.
Click on the first or last page to see other EH-NE70 / EH-NE60 service manuals if exist.