Read Panasonic UE-407019NA Service Manual Supplement online
Panasonic G3 Communication Port Kit
28
5 Service Modes
5.1
Service Mode 1 (Function Parameter Setting)
Use the following procedure to change the function parameters.
Note 1:
The following buttons provide these functions in the test mode:
"START" : The new setting value is stored in the machine.
"\/" : Scrolls the function parameter number down.
"/\" : Scrolls the function parameter number up.
"START" : The new setting value is stored in the machine.
"\/" : Scrolls the function parameter number down.
"/\" : Scrolls the function parameter number up.
Step
Operation or Unit Condition
LCD Display
1
Standby
2
Press “FUNCTION” and then “7”.
3
Press “MONITOR” four times, then press “*”.
4
Press “1”.
5
Enter the Function Parameter Number.
Ex: Changing the "DC LOOP" -- Enter "209" and press [SET].
Ex: Changing the "DC LOOP" -- Enter "209" and press [SET].
6
Press “START”.
7
Enter the new setting value.
Ex: Enter "2" for On.
Ex: Enter "2" for On.
8
Press “START”. The new value will be stored and the next parameter will be
displayed.
displayed.
9
Repeat steps 4 through 7 to change other Function Parameters or Press
“STOP” twice to return to standby.
“STOP” twice to return to standby.
MAY-12-1999 15:00
00%
SET MODE (1-6)
ENTER NO. OR
SERVICE MODE
ENTER NO. OR
PARAMETER (000-299)
ENTER PARAMETER #_
PARAMETER #209
DC LOOP?
DC LOOP:Off
1:OFF 2:ON
DC LOOP:On
1:OFF 2:ON
PARAMETER #210
TX LEVEL?
MAY-12-1999 15:00
00%
Click on the first or last page to see other UE-407019NA service manuals if exist.