UE-403162NA - Panasonic Fax Service Manual Supplement (repair manual). Page 33

33

The default setting of parameters depends on the country’s specifications or regulations.  Print the Function Parameter List to 
confirm the default settings.

130

BUSY-ACK TIMING

• In  Busy
• After Busy
• While Busy

Selects the signal timing between the BUSY and 
ACK signal in Printer Interface Mode.

131

CMD RCV GRD TIMER

1 min.
~
15 min.

Selects the Guard Timer between each GDI 
Command in Printer Inteface Mode.

132

PRT DATA TIMER

1 min.
~
15 min.

Selects the Guard Timer between each GDI Data 
Frame in Printer Interface Mode.

133

COLLATION (PRT)

1 = Off
2 = On
3 = Auto

Selects the Print Collation in Printer Interface 
Mode.
When “Auto” is selected, print collation will operate 
according to the setting in Fax Parameter #65.

135

JOB END TIMER

1 sec.
~
999 sec.

Selects the Guard Timer while printing a data with 
the Panafax Printing System ver. 5e/6.

136

JAM RECOVERY

1 = Off
2 = On

Selects the JAM Recovery function in the PDL 
Printer Interface Mode.
Off: Printing performance is faster, however if a 

paper jam occurs the jammed pages will not 
be reprinted automatically.

On: Printing performance is slower, however if a 

paper jam occurs the jammed pages will be 
reprinted automatically.

160

VERSION

Indicates the ROM version on the FRM 
PC Board.